The damage done to a mature lawn or landscape (in particular) after a major sewer repair, drainage improvements or new flood control system has been installed can be minimal or quite extreme. Plant material, lawns, irrigation systems, retaining walls, pavement and low voltage lighting can be damaged or completely destroyed when underground construction takes place near by. Other matters like extreme soil compaction and severed mature plant root systems are very common issues as well. Depending on the initial soil excavation depth, size of equipment used, property location, type of underground repair performed and amount of construction spoils left behind will normally dictate the cost of landscape restoration services required. One of the main cost drivers (besides labor and materials) of residential landscape restoration work (post sewer/flood control improvements) is the amount of excess stone/debris that is left behind. When hiring an underground repair contractor it is always a good idea to be aware and to discuss who exactly will be responsible for the cost of removing excess fill/debris (off-site) if needed. If the excess fill material that is left behind is somewhat desirable (soil or sand) and lacks large pieces of unwanted stone, bricks, concrete, etc. than it can be easily re-purposed/relocated on-site to reduce overall restoration costs. Some examples of how to use these excess materials may be to elevate a low lying plant bed area, create a new raised planting bed or to fill-in multiple low/sunken lawn areas that are in need of repair. In addition, please keep in mind that it is very likely that ground settling will occur after deep soil excavation work has been performed. Depending on how well the underground contractor compacted the back-filled soil/stone will determine the amount of ground settling to be experienced in the future (1-3 years post landscape repair). Please contact Pacocha Landscaping Services, Inc. to assist in evaluating and providing the necessary lawn and landscape restoration services for your Chicago or surrounding northwest suburban residential property.
Thank you for your time and we look forward to being of assistance to you in the very near future.
Please follow and like us:
As a Chicago area snow and ice management contractor for nearly 20 years, we have grown quite accustomed to the effectiveness of steel edged snow plows, shovels, blowers, etc. Steel is the most common and in many cases lowest cost material to use at the bottom of a snow clearing piece of equipment. The reason steel is the go-to trusted material for scraping, plowing and even lifting snow is it’s great durability, performance and availability. Another great aspect of steel is that it can be repaired fairly easily by welding two broken pieces together, straightened when bent by applying intense heat and if needed quickly replaced. Even though steel edged snow removal tools have earned their place in the snow fighters “tool box” over the years, you should be aware of other great materials that can provide excellent snow and ice clearing, but also provide very minimal wear or scratching of the surface being cleaned. The other materials that make for great snow removal cutting/wear edges are solid rubber and polyurethane. Rubber blades offer great abrasion resistance. As you know rubber blades are more flexible and elastic than metal blades, therefore absorb impact, shock, and conform easily to the pavement surface. Rubber will reduce damage to the surface being cleared, making it the ideal choice for use on parking garages, brick pavers, cobblestone, or any other sensitive uneven surface. Rubber (in my opinion) is the fastest wearing material when used commercially on a vehicle operated snow plow. The other material is polyurethane. Polyurethane provides improved abrasion characteristics over rubber and most metals. Even though polyurethane is very expensive, it is also very resilient, and therefore absorbs impacts and conforms to the surface being plowed quite nicely. Polyurethane cutting edges reduce equipment wear by minimizing blade and equipment vibration. Polyurethane cutting edges are very quiet in operation, making them ideal for use in residential areas and hospitals. Even though rubber and polyurethane cutting edges certainly have earned their place for clearing snow across the greater Chicago and northwest surrounding suburban area, my favorite material remains to be steel for the excellent proven results it produces year after year. Please contact Pacocha Landscaping Services, Inc. with any questions or snow and ice management service requests you may have. Thank you for taking the time to read my blog!
Please follow and like us: